FISHER & PAYKEL LARGE RANGE IGNITER I/R (1PK) – 211542P

Ignitor,large works with some Fisher & Paykel models of stoves / ovens / ranges. DIY Guide to Replacing a Fisher & Paykel 211542P Range Ignitor, Large – 4.5″

Are you noticing an issue with the flame on your Fisher & Paykel gas range? It might be time for a new ignitor. Replacing the ignitor on your Fisher & Paykel range can be intimidating at first, but with the right instructions and a little DIY know-how, you can have a new ignitor installed in no time. Follow this guide to replace the Fisher & Paykel Model 211542P large-range ignitor, which measures 4.5″ in length.

What You’ll Need:

• Fisher & Paykel Range Ignitor, Large – 4.5″ (211542P)

• Phillips head screwdriver

• Pliers

Instructions:

1. Locate the burner grate and burner head on your range. Remove both by lifting straight up and off.

2. Detach the ignitor wire from the burner head, and remove the Phillips-head screw securing the ignitor in place.

3. Use a pair of pliers to gently pry the old ignitor away from its mounting bracket.

4. Carefully slide the new 211542P ignitor into place at the top of the mounting bracket. Make sure that it is securely seated before moving on.

5. Reattach the ignitor wire, and then secure the ignitor in place using the Phillips-head screw.

6. Replace the burner head and grate in their original positions, being careful not to touch the ignitor.

7. Turn the burner knob to the “High” setting to test the new ignitor. The flame should light up immediately.

Now you know how to replace a Fisher & Paykel range ignitor. With the right tools and a little bit of patience, anyone can do it!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.