GE DISHWASHER TURBIDITY SENSOR – WD21X22830

Turbidity sensor works with some GE, and Hotpoint models of dishwashers. 1. Unplug the dishwasher from the power source and turn off the water supply.

2. Open the dishwasher door and pull out the bottom rack.

3. Use a Phillips head screwdriver to remove four screws found on the front underside panel of the dishwasher.

4. Carefully lift the panel to access the dishwasher’s interior.

5. Locate the turbidity sensor near the bottom right corner of the dishwasher.

6. Use a pair of needle nose pliers to disconnect the electrical wires connected to the turbidity sensor.

7. Remove the two screws which hold the turbidity sensor in place.

8. Pull the old turbidity sensor out of the dishwasher and discard it.

9. Insert the new turbidity sensor into the same position as the old one. Secure with the two screws.

10. Connect the electrical wires back onto the new turbidity sensor.

11. Reattach the underside panel using the four screws.

12. Push the bottom rack back into the dishwasher.

13. Plug the dishwasher back into the power source and turn on the water supply.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search GDF610PGJ5BB GDF610PGJ5WW GDT545PGJ6WW GDT635HGJ6BB GDF620HGJ6BB GDF610PSJ6SS GDF610PMJ6ES GDT635HSJ6SS GDT635HGJ6WW GDF610PGJ6WW GDT635HMJ6ES GDF520PSJ6SS GDF520PMJ6ES GDF620HGJ6WW GDT625PGJ6WW GDT625PGJ6BB GDF610PGJ6BB GDF520PGJ6CC GDF620HSJ6SS GDF520PGJ6WW GDT625PSJ6SS GDF520PGJ6BB GDF620HMJ6ES GDT545PFJ6DS GDT545PGJ6BB DDT595SSJ5SS GDF570SGJ5BB GDT655SBL5TS GDT655SSJ5SS CDT835SMJ5DS DDT595SFL5DS DDT595SGJ5WW GDF570SGJ5WW GDF650SMJ5ES GDF570SGJ5CC DDT595SGJ5BB DDT595SMJ5ES DDT595SBL5TS GDF650SFJ5DS GDT655SGJ5BB 1 2 3 4 5