GE DRAIN PUMP AND MOTOR MECHANISM ASSEMBLY – WD26X10051

GE General Electric RCA Hotpoint Sears Kenmore Dishwasher Drain Pump and Motor Mechanism Assembly WD26X10051We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs. DIY Guide to Replacing the GE WD26X10051 Drain Pump And Motor Mechanism Assembly

Replacing the drain pump and motor mechanism assembly in your GE washer is a relatively simple task and can be done by most DIYers with some basic hand tools. This guide will provide step-by-step instructions on how to replace the GE WD26X10051 drain pump and motor mechanism assembly.

What You’ll Need:
-GE WD26X10051 drain pump and motor assembly
-Socket set and/or screwdriver
-Pliers

Step 1: Disconnect Your Washer
Before beginning any repair work on your washer, make sure to disconnect the power. Unplug the unit from the wall outlet or turn off the circuit breaker.

Step 2: Access the Drain Pump and Motor Assembly
To access the drain pump and motor assembly, open the access door located on the back of the washer. Then, remove the two screws that secure the back panel to the washer frame. Carefully pull the panel off, ensuring that you don’t damage any of the plumbing connections.

Step 3: Remove the Old Drain Pump and Motor Assembly
The old motor assembly is held in place by two mounting screws. Use a socket set or screwdriver to remove the screws and then carefully pull the motor assembly out of the washer. Disconnect any electrical wires that are connected to the motor assembly.

Step 4: Install the New Drain Pump and Motor Assembly
Carefully insert the new motor and pump assembly into the washer, making sure that the electrical wiring is properly connected. Then, secure the assembly in place with the screws.

Step 5: Test the Washer
Once the assembly has been installed, reattach the back panel and plug the washer back in. Turn the power back on and run a short cycle to test the operation. If the washer begins to fill, drain, and spin as expected, you have successfully replaced the drain pump and motor assembly.

Congratulations! You have now replaced the GE WD26X10051 Drain Pump and Motor Mechanism Assembly in your washer. With just a few basic tools, you have successfully completed a DIY repair that can help save money and improve the longevity of your appliance.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search ADW1100N20BB ADW1100N20WW ADW1100N30BB ADW1100N30WW ADW1100N35BB ADW1100N35WW GSD1300N20WW GSD1300N30WW GSD1300N35WW GSD3300R20BB GSD3300R20CC GSD3300R20WW GSD3340D35MB HDA1100F00WH MSD2100R20WW GSD3300D35CC GSD4060D45SS HDA2100H45BB HDA3600H45BB GSC3500V00WW GSD2100V00CC GSD2100V35BB GSD2100V45WW GSD3300D45BB GSD3300D45CC GSD3340D45SA HDA3600H45WW GSD3300V00BB GSD3300V00CC GSD3300V00WW GSM2200V00WW GSM2260V00SS GSD2100V45BB GSD2100V45CC GSD2101V45BB GSD2101V45WW GSM2200V45BB GSM2200V45WW GSM2260V45SS HDA3600D35WW 1 2 3 4 5