GE STOVE BURNER CONTROL KNOB – WB03X21228

Burner control knob works with some GE, Hotpoint, and RCA models of stoves / ovens / ranges. Step 1: Preparing For Replacement
Turn off your stove and unplug it from the outlet. Lift up the burner cap from the stove and remove the burner grates. Put them aside in a safe place. Using a Phillips head screwdriver, unscrew the screws holding the control knob onto the stove, this will release the old WB03X21228 GE Stove Burner Control Knob.

Step 2: Installing the New Burner Knob
Insert the new WB03X21228 GE Stove Burner Control Knob into the opening where the old one was located. Make sure that all the metal pins line up with the corresponding slots in the control knob. Replace the screws to hold the control knob in place.

Step 3: Finishing Touches
Plug the stove back into an electrical outlet and turn it on. With the burner caps removed, you can visually inspect the burner knobs to make sure they are turning properly and the burners are lighting up. When you’re satisfied with the performance, replace the burner caps and grates. You have successfully replaced the WB03X21228 GE Stove Burner Control Knob.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search JGBS30DEK1WW JGBS61DP1WW JGBS60DEK5WW JGBS30DEK4WW JGBS10DEM3WW JGBS30DEK3WW JGBS10DEM2WW JGBS30DEK2WW JGBS10DEM1WW JGBS60DEK4WW JGBS60DLF1WW JGBS60DLK2WW JGBS60DEK3WW JGBS14PCF1WW JGBS60DEK2WW JGBS10DEF1WW JGBS60DLK1WW JGBS60DEF1WW JGBS10DEK1WW JGBS60DEK1WW