GE STOVE RANGE OVEN SENSOR HEAT PROBE ASSEMBLY – WB23X5340

GE General Electric Hotpoint Sears Kenmore Stove Range Oven SENSOR HEAT PROBE ASSEMBLY WB23X5340We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs. Replacing the GE Stove Range Oven SENSOR HEAT PROBE ASSEMBLY

DIY Step-by-Step Instructions

1. Turn your oven off and unplug it from the wall.

2. Open the oven door, and locate the heat sensor probe.

3. Gently pull the sensor heat probe out of its socket.

4. Remove the two screws fastening the SENSOR HEAT PROBE ASSEMBLY to the oven.

5. Disconnect the wiring harness from the SENSOR HEAT PROBE ASSEMBLY.

6. Re-connect the wiring harness to the new SENSOR HEAT PROBE ASSEMBLY.

7. Place the new SENSOR HEAT PROBE ASSEMBLY in the socket and secure it with the two screws.

8. Plug the oven back into the wall, and turn it on.

9. Test the oven by setting the desired temperature and check that the oven heat is correct.

You have now successfully replaced the GE Stove Range Oven SENSOR HEAT PROBE ASSEMBLY!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search 157710 157810 157850 157860 C2S980SEM1SS C2S980SEM2SS C2S980SEM3SS C2S980SEM4SS C2S980SEM5SS C2S980SEM6SS CS975SD1SS CS975SD2SS CS980SN1SS CS980SN2SS CS980SN3SS CS980ST1SS CS980ST2SS CS980ST3SS CS980ST4SS ECBS68WJ1WW ECBS68WJ2WW ECBS68WJ3WW ECBS68WM1WW J2B900BEF1BB J2B900CEF1CC J2B900SEF1SS J2B900SEF2SS J2B900WEF1WW J2B915BEH1BB J2B915BEH2BB J2B915BEH3BB J2B915CEH1CC J2B915CEH2CC J2B915CEH3CC J2B915SEH1SS J2B915SEH2SS J2B915SEH3SS J2B915WEH1WW J2B915WEH2WW J2B915WEH3WW 1 2 3 4 5