GE STOVE HALIANT BURNER – WB30T10155

Haliant burner works with some GE, Hotpoint, and RCA models of stoves / ovens / ranges. Replacing the WB30T10155 GE Stove Haliant Burner:

Step 1: Unplug the stove to avoid the risk of electric shock.

Step 2: Remove the burner grate and set aside for safe-keeping.

Step 3: Carefully pry off the ignition switch bezel with a flathead screwdriver, being careful not to damage the trim around the switch.

Step 4: Turn the switch counterclockwise to remove it from its socket and disconnect the wires attached to it.

Step 5: Remove the screws that secure the burner base in place, then lift up and remove the base.

Step 6: Lift the igniter out of its slot and disconnect the wire.

Step 7: Place your new burner in the opening, making sure all the tabs fit securely into the slots in the stove top.

Step 8: Reattach the ignition switch and reconnect the wiring.

Step 9: Secure the burner with the screws you removed earlier and replace the bezel.

Step 10: Replace the burner grate, plug in the stove and test to ensure proper operation.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search JB750DF1BB JB750DF1CC JB750DF1WW JB750DF2BB JB750DF2CC JB750DF2WW JB750EF1ES JB750EF2ES JB750SF2SS JB870DF1BB JB870DF2BB JB870SF1SS JB870SF2SS JB870TF1WW JB870TF2WW JD750DF1BB JD750SF1SS PB920DT1BB PB920ST1SS PB920ST2SS PB930SF1SS PB930SF2SS PB930TF1WW PB930TF2WW PB978DT1BB PB978ST1SS PB979ST1SS PCB920ST1SS PCB920ST2SS PCB950SF2SS CES750P4M1W2 CES750P3M1D1 PB930SL3SS PB960SJ6SS PB960EJ6ES PCB980SJ5SS PB960BJ6TS PB960FJ6DS PB980SJ5SS PB930DF1BB 1 2 3 4 5