LG WASHER GASKET – 4036ER4001F

Gasket works with some LG models of Washers Step 1: Unplug the Washer – Before attempting any repairs on the LG washer, make sure to unplug it from the power source.

Step 2: Remove the Top Panel – Use a flat-head screwdriver to unscrew the rear panel of the washer, which should expose the top panel. Carefully lift off the top panel and place it aside.

Step 3: Locate the Gasket – Once the top panel is removed, you’ll be able to locate the old gasket. It will be located underneath the rim around the front of the washer.

Step 4: Remove the Old Gasket – Using a flat-head screwdriver, loosen the screws that are attaching the old gasket to the washer. Once all the screws have been removed, you can then remove the old gasket from the machine.

Step 5: Install the New Gasket – Take your new LG 4036ER4001F washer gasket and line it up with the rim of the washer. Use the same screws that were used to attach the old gasket and secure the new gasket in place.

Step 6: Replace the Top Panel – Once the new gasket has been installed, reattach the top panel of the washer using the same screws that were removed.

Step 7: Plug the Washer Back in – After all the repairs have been completed, plug the LG washer back in and test it to make sure the new gasket is functioning correctly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search 41002