LG WASHER WATER CLEAN OUT DRAIN HOSE CONNECTOR – 5214FR4006G

LG Electronics Sears Kenmore Clothes Washer Washing Machine Water Clean Out Drain Hose Connector 5214FR4006G DIY: How to Replace an LG Washer Water Clean Out Drain Hose Connector (Model # 5214FR4006G)

If your LG washer isn’t draining properly, you may need to replace the water clean out drain hose connector. This DIY guide will walk you through the steps to replace the LG Washer Water Clean Out Drain Hose Connector (Model # 5214FR4006G).

Tools You’ll Need

• Replacing LG Washer Drain Hose Connector (Model #5214FR4006G)

• Phillips head screwdriver

• Adjustable wrench

Step 1: Unplug Your Washer

Start by unplugging your washer so that you don’t get any electric shocks while replacing the LG washer water clean out drain hose connector.

Step 2: Take Off the Washer Cover

Use a Phillips head screwdriver to remove the screws holding the washer cover in place. Carefully lift off the cover and set it aside.

Step 3: Locate and Disconnect the Drain Hose Connector

The drain hose connector is located near the top of the washer cabinet. Use an adjustable wrench to disconnect the hose from the connector.

Step 4: Install the New Drain Hose Connector

Take the new connector and insert it into the drain hose. Make sure that it is securely fastened and properly aligned. Then use an adjustable wrench to tighten the connection.

Step 5: Reattach the Washer Cover

Finally, reattach the washer cover and secure it with the Phillips head screws.

You’re Done!

Now that you have replaced the LG Washer Water Clean Out Drain Hose Connector (Model # 5214FR4006G), your washer should be draining properly and your laundry will be fresh and clean!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search 41073