SAMSUNG WAVEGUIDE COVER – DE81-08803A

Waveguide cover works with some Dacor models of microwaves. How to Replace the Samsung DE81-08803A SVC-WAVE GUIDE COVER

Replacing the Samsung DE81-08803A SVC-WAVE GUIDE COVER is a quick and simple DIY project. This guide details the step-by-step instructions for replacing this part of your Samsung microwave.

Tools and Materials Required:

– Phillips screwdriver
– Flathead screwdriver
– New Samsung DE81-08803A SVC-WAVE GUIDE COVER

Step 1: Unplug the power cord from your wall socket. This must be done in order to ensure your safety while working on the unit.

Step 2: Remove all of the screws from the back of the microwave. There should be two sets of screws near the top and two sets of screws near the bottom. Use a Phillips screwdriver to remove these screws.

Step 3: Carefully remove the back cover of the microwave. Be careful not to damage any wiring or other components.

Step 4: Use a flathead screwdriver to remove the screws that hold in place the old Samsung DE81-08803A SVC-WAVE GUIDE COVER.

Step 5: Gently remove the old wave guide cover.

Step 6: Place the new Samsung DE81-08803A SVC-WAVE GUIDE COVER in place and secure it with the screws you removed earlier.

Step 7: Place the back cover back on the microwave and re-secure it with the remaining screws.

Step 8: Plug the power cord back into the appropriate wall socket and you are done!

Congratulations, you have successfully replaced the Samsung DE81-08803A SVC-WAVE GUIDE COVER on your own.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.