LG REFRIGERATOR ICE MAKER ASSEMBLY KIT – AEQ73110203

LG Electronics Sears Kenmore Refrigerator Ice Maker Assembly KIT AEQ73110203 DIY Instructions on Replacing the AEQ73110203 LG Refrigerator Ice Maker Assembly KIT

This step-by-step guide will help you easily replace the AEQ73110203 LG Refrigerator Ice Maker Assembly KIT in seven easy steps. With this comprehensive guide, even a first-time DIYer can successfully complete this repair job.

Step 1: Gather the Necessary Tools and Parts

For this repair, you will need the following items:

• AEQ73110203 LG Refrigerator Ice Maker Assembly KIT

• Phillips-head screwdriver

• Flathead screwdriver

• Adjustable wrench

Step 2: Unplug the Refrigerator from the Wall Outlet

Safety is paramount when performing DIY repairs. Make sure to unplug the refrigerator from the wall outlet before continuing with your repair.

Step 3: Remove the Ice Maker Housing

Open the refrigerator door and find the ice maker housing on the back wall. Using the screwdriver, remove the mounting screws that secure the ice maker housing to the wall. Once the screws are removed, lift the housing off the wall.

Step 4: Disconnect the Water Line

When the housing is removed, you will see the tubing connected to the back of the ice maker. Use the adjustable wrench to loosen the connection and remove the water line.

Step 5: Remove the Old Ice Maker

Now it’s time to remove the old ice maker. Use the Phillips-head screwdriver to remove the three mounting screws at the top, bottom, and back of the ice maker. Once these screws are removed, the ice maker can be easily lifted out of the housing. Carefully set aside the old ice maker.

Step 6: Install the New Ice Maker

Place the new ice maker into the housing and secure it with the mounting screws. Make sure that the connections on the back of the ice maker line up with the holes in the housing.

Step 7: Connect the Water Line and Test the Ice Maker

Once the new ice maker is in place, reconnect the water line and tighten the connection using the adjustable wrench. Plug the refrigerator back into the wall outlet, and turn it on. Check that the ice maker is producing ice correctly.

Congratulations! You have successfully replaced your LG Refrigerator Ice Maker Assembly KIT!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search 72063 72193 71053 71054 71056 71072 71073 LFX25973ST LFX25973SW LFX28978ST LFX28978SW LFX28979ST LFX28991ST LFX32945ST LFX25973D LMX28988ST LMX28994ST LMX30995ST