LG REFRIGERATOR DOOR HINGE STOPPER – MJB63029901

LG Electronics Sears Kenmore Refrigerator DOOR HINGE STOPPER 4620JJ2009A How to Replace the LG Refrigerator Door Hinge Stoppers

If your LG refrigerator door is no longer properly closing, you may need to replace the door hinge stoppers. Luckily, replacing the hinge stoppers is a relatively easy DIY project, and can be completed in just a few steps.

Tools You’ll Need:

-Phillips head screwdriver

-Socket wrench

-Hinge stop replacement kit (MJB63029901)

Step 1: Unplug the refrigerator from the wall outlet and move it away from the wall.

Step 2: Place the socket wrench on the bolts that secure the top hinge cover, then loosen them and remove the cover.

Step 3: Locate the old hinge stopper and use the Phillips head screwdriver to unscrew it.

Step 4: Remove the old hinge stopper and discard it.

Step 5: Install the new stopper by placing it in the hole and screwing it into place with the Phillips head screwdriver.

Step 6: Re-install the top hinge cover and use the socket wrench to tighten the screws.

Step 7: Plug the refrigerator back into the wall outlet and move it back into its original position against the wall.

Your refrigerator door should now have a firm fit and proper closure after replacing the MJB63029901 LG refrigerator door hinge stopper.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search 79433 LTCS20120W