SAMSUNG WASHER AIR HOSE TUB HOSING – DC67-00848A

Air Hose Tub Hosing works with some models of Samsung Washers Replacing the DC67-00848A Samsung Washer Air Hose Tub Hosing

Replacing the air hose tubing on your Samsung washer is an easy do-it-yourself (DIY) project that can be done with a few simple tools. Follow these steps to replace the air hose tubing on your washer:

1. Unplug the washer from the wall outlet and turn off the water supply.

2. Remove all items from the washer drum.

3. Unscrew the screws located on the back of the washer, near the top and bottom edges.

4. Carefully lift up and remove the washer’s back panel.

5. Locate the air hose and disconnect it from the control board at one end and the tub at the other end.

6. Pull off the old air hose tubing.

7. Place the new air hose tubing in position.

8. Reconnect the air hose tubing to the control board and the tub.

9. Replace the back panel and re-screw the screws.

10. Restore the water supply and plug the washer back into the wall outlet.

Congratulations! You have successfully replaced the air hose tubing on your Samsung washer.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.