SAMSUNG TOP CAP SERVICE KIT – DE81-06163A

Top cap cover d dual works with some Dacor models of cooktops. DIY Instructions For Replacing The Samsung DE81-06163A SVC-TOP CAP SERVICE KIT

1. Unplug the refrigerator. Make sure to disconnect the power cord from the wall outlet to ensure there is no electricity running through the appliance.

2. Remove the top and side panels of the refrigerator. On most models, you can access the panels by removing screws on the back or side of the appliance.

3. Locate and remove the old SVC-top cap service kit. The assembly is usually behind the control panel and compressor.

4. Disconnect any wires connected to the old kit. This can include electrical wiring or tubing. Be sure to neatly coil and label each wire or tube for easy reattachment.

5. Install the new SVC-top cap service kit. Connect any disconnected wires or tubing and make sure that all connections are tight.

6. Replace all panels on the refrigerator and reinstall the screws to secure them in place.

7. Plug the refrigerator back into the wall outlet and turn the power back on. This will allow the refrigerator to start functioning properly once again.

Congratulations, you have successfully replaced the Samsung DE81-06163A SVC-top cap service kit!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.