WHIRLPOOL DRYER DRIVE MOTOR – 279787

The 279787 Whirlpool Dryer Drive Motor is an essential component of any Whirlpool dryer. This durable motor features a 1/4 HP and 2500 RPM, capable of powering your dryer to ensure efficient and effective performance. This motor also features a 120V with 60Hz frequency, making it ideal for most standard Whirlpool dryers. The heavy-duty design offers superior reliability, providing a long-lasting solution to your drying needs. With its easy installation and simple setup, the 279787 Whirlpool Dryer Drive Motor is sure to get your dryer working in no time. We’re your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! DIY Guide: How to Replace a 279787 Whirlpool Dryer Drive Motor
1. Preparation – Before proceeding with the replacement, unplug the dryer and switch off the power supply. Remove the vent hose and back panel screws to gain access to the motor.

2. Motor Removal – Release the tension on the belt and remove the rear drum seal to expose the motor. Disconnect the electrical plugs and unscrew the two bolts that hold the motor in place. Carefully slide the motor out from its position.

3. Replacement – After disconnecting the wires of the old motor, insert the new 279787 Whirlpool dryer drive motor into position. Secure it with the bolts and ensure that the connections are properly made.

4. Final Step – Re-install the rear drum seal, reinstall the belt and secure the back panel with its previous screws. Switch on the power supply and test the dryer by running a full cycle.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product 3387185 3388237 3388238 3391890 3391891 3391893 3395654 W10438969 3391890 279787SKID No more associated models for this part.