WHIRLPOOL WASHER TUB SUSPENSION PAD KIT, 3PK – 285744

The 285744 Whirlpool Washer Tub Suspension Pad Kit, 3PK is the perfect way to keep your Whirlpool washer running smoothly. These durable rubber pads help reduce vibration and noise while ensuring proper tub movement and balance while spinning. Each pad measures 2-1/2″ x 3-1/2” and features a top and bottom mounting hole. They are designed to fit a variety of Whirlpool front-load and top-load washers, including those manufactured by Maytag and Amana. Keep your washer in optimal condition with the 285744 Whirlpool Washer Tub Suspension Pad Kit, 3PK. We’re your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Replacing a 285744 Whirlpool Washer Tub Suspension Pad Kit, 3PK: A DIY Guide

When it comes to home appliances, there are some repairs that require professional help and some which can be done as an easy DIY project. Replacing a Whirlpool washer suspension pad kit is a repair that can be done in a short amount of time with minimal effort. With the right supplies and guidance, you’ll have your machine running like new in no time. Before starting, it’s important to note that you should use caution when doing any repairs and make sure that you unplug all electrical appliances beforehand.

What You’ll Need
• Phillips-head screwdriver
• Replacement suspension pad kit (Part No. 285744)
• Textile gloves
• PVC or rubber gloves
• Shop cloth

Step 1: Unplug the Washer
As a safety precaution, unplug the washer from its power source before beginning the repair. This will ensure that you do not get shocked during the repair process.

Step 2: Remove the Top Panel
Using your Phillips-head screwdriver, remove the screws located on the sides of the top panel of the washer. Once you have removed these screws, lift up the panel and set it aside.

Step 3: Remove the Suspension Pads
If you’re replacing all three pads, grab one at a time and detach them from the motor bracket. Be gentle and make sure that the pads are disconnected from the bracket.

Step 4: Install the New Pads
Now that the old pads have been removed, it’s time to install the new ones. Start by attaching one side of the pad to the motor bracket. Securely fasten it to the bracket and make sure that it’s securely attached. Repeat this process for the remaining pads.

Step 5: Put the Top Panel Back into Place
Once all pads are securely installed, replace the top panel and use the Phillips-head screwdriver to re-attach the screws. Make sure that they are securely fastened.

Congratulations! You have successfully replaced a 285744 Whirlpool Washer Tub Suspension Pad Kit, 3PK. If you experience any issues or need any further assistance, please consult the user manual for more information.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product 285220 285661 3357327 3363660 62602 No more associated models for this part.