WHIRLPOOL REFRIGERATOR ICE AND WATER FILTER 2 (ORANGE) – EDR2RXD1

Ice and water filter 2 works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of fridges. Certified to reduce 99% of lead, offering superior contaminant reduction for you and your family.Reduces 28 contaminants including lead, pesticides, pharmaceuticals, and waterborne parasites (NSF 401, 53 and 42 certified). Replacing the EDR2RXD1 Whirlpool Refrigerator Ice and Water Filter 2

Gaining access to the filter:

1. Locate the water filter housing in the ceiling of the refrigerator compartment.

2. Twist the filter 1/4 turn counterclockwise to unlock and remove.

Replacing the filter:

1. Check the new filter for proper orientation. The arrow on the side of the filter should point toward the refrigerator wall.

2. Insert the filter into the housing.

3. Twist the new filter 1/4 turn clockwise until it is properly seated.

4. Reset the “change filter” indicator light, if your model has one.

5. End by flushing the new filter with one to two gallons of cold water to improve taste and reduce air bubbles.

Tips for optimizing your DIY experience:

• Always read and follow the directions provided with the new filter before starting installation.

• Make sure you turn off the water supply to the refrigerator before beginning the process.

• Have a bucket handy in case of any spills or leaks.

• If you have any questions during the process, check the owner’s manual or contact a certified technician.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product W10413645A W10413645 No more associated models for this part.