WHIRLPOOL REFRIGERATOR CONDENSER FAN MOTOR KIT W/BLADE – W10124096

Whirlpool – Sears Kenmore – KitchenAid – Roper Refrigerator Condenser Fan Motor W/Fan Blade W10124096We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs. DIY Instructions for Replacing the Whirlpool Refrigerator Condenser Motor with Fan Blade

1. Start by unplugging your refrigerator from the wall outlet and disconnecting any water lines attached to the refrigerator if present.

2.Lay the refrigerator down so you can access the back of the appliance.

3.Remove the screws that hold the back panel in place and gently pull the panel away from the refrigerator.

4.Locate the condenser motor and fan blade and gently remove the fan blade from the condenser motor by unscrewing the retaining bolts.

5.Get the replacement fan blade and affix it to the condenser motor using the same retaining bolts. Make sure the fan blade is secured and fits properly on the motor.

6.Reattach the back panel on the refrigerator and reattach any water lines if they existed.

7.Turn the refrigerator back upright and plug it in to the wall outlet.

8.Turn on the refrigerator and test for proper operation.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product 2206005 2315558 W10204250 W10509333 W10861645 SM4096 Search ED5CHQXKQ07 GS6SHEXNT05 GS6SHEXNS05 GS6SHEXNQ05 GS6SHEXNL05 GS6SHEXNB05 GS2SHAXSS03 GS2SHAXSQ03 GS2SHAXSB03 ED5JHAXTT02 ED5JHAXTS02 ED5JHAXTQ02 ED5JHAXTL02 ED5JHAXTB02 ED5FHAXST03 ED5FHAXSS03 ED5FHAXSQ03 ED5FHAXSL03 ED5FHAXSB03 ED5CHQXKT07 ED5CHQXKB07