FRIGIDAIRE/ELECTROLUX REFRIGERATOR GASKET – 241786008

This is a genuine OEM part that works for some models of Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, Crosley, Kenmore, and Tappan models. Replacing the Whirlpool 2306996 GASKET-FIP

1. Disconnect the power to the appliance: turn off the power switch or unplug the electrical cord from the wall outlet.

2. Turn off the gas valve, typically located near the bottom of the appliance.

3. Open up the appliance and locate the Gasket-FIP.

4. Remove any screws holding the gasket in place and carefully remove the old gasket.

5. Make sure the mounting surface is clean and dry before applying a thin coat of plumbers’ putty if desired.

6. Place the new Gasket-FIP into the area, being careful not to over tighten the mounting screws.

7. Replace any insulation that may have been removed during the process.

8. Turn on the gas valve and then turn on the power to the appliance.

9. Test the connection to make sure it is secure.

10. Finally, test the appliance for proper operation.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search CRSE234FB3 CRSE234FB4 CRSE234FSM3 CRSE234FSM4 CRSE234JB0 CRSE234JB1 CRSE234JB2 CRSE234JB3 CRSE234JSM0 CRSE234JSM1 CRSE234JSM2 CRSE234JSM3 CRSH232PB0 CRSH232PB1 CRSH232PB2 CRSH232PB3 CRSH232PB5 CRSH232PB6 CRSH232PB7A CRSH232PB8A CRSH232PB9A CRSH232PBBA CRSH232PS0 CRSH232PS1 CRSH232PS3 CRSH232PS4 CRSH232PS5A CRSH232PS6A CRSH232PS7A CRSH232PS9A CRSH237LB0 CRSH237LB1 CRSH237LB2 CRSH237LB3 CRSH237LB4 CRSH237LS0 CRSH237LS1 CRSH237LS2 CRSH237LS3 CRSH237LS4 1 2 3 4 5