FRIGIDAIRE FRIGIDAIRE PURESOURCE WATER FILTER, 2PK – WF2CB

Frigidaire Electrolux Westinghouse Kelvinator Sears Kenmore Refrigerator WF2CBPureSource2 Ice & Water Filtration System is Frigidaires newest, most advanced filtration system ever. This filter is designed for convenience, appearance and function with it’s front one touch loading system. The PureSource2 filtration system is built into the inside of your refrigerator for replacement ease and convenience. Replaces part#FC100, also replaces Sears Kenmore part# 46-9911.We are a Factory Authorized Parts Distributor for Frigidaire. Trust us for all of your Frigidaire appliance parts and accessories needs. DIY Instructions to Replace the Frigidaire Puresource Water Filter (WF2CB, 2PK)

Step 1: Locate the Water Filter. The water filter is located in the bottom right-hand corner of your refrigerator compartment.

Step 2: Turn off the water supply. Before you begin, make sure you turn off the cold water valve that supplies water to the refrigerator.

Step 3: Remove the old filter. Remove the old filter by twisting it in a counterclockwise direction until it comes loose.

Step 4: Insert the new filter. Push the new filter into the filter housing and twist it gently in a clockwise direction to secure it in place.

Step 5: Turn on the water supply. Turn the cold water valve back on to restore water flow to the refrigerator.

Step 6: Flush the filter. Allow one gallon of water to flush through the system to remove any air pockets and purify the water.

Step 7: Check for leaks. Check for any water leakage around the filter housing to ensure it is properly secured.

Congratulations! You have successfully replaced the WF2CB Frigidaire Puresource Water Filter, 2PK!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.