FRIGIDAIRE RANGE PORCELAIN DRIP BOWL, 8″ – A316222301

Porcelain drip bowl, 8″ works with some Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, Crosley, Kenmore, and Tappan models of stoves / ovens / ranges. DIY Guide to Replacing a Frigidaire Range Porcelain Drip Bowl, 8″ (A316222301)

Ever had a messy kitchen caused by an old and cracked porcelain drip bowl? Don’t worry, it happens to the best of us. But the good news is that replacing the porcelain drip bowl is actually quite a simple DIY job. All you need is a Phillips screwdriver, 8-Inch Frigidaire Range Porcelain Drip Bowl (A316222301), and the tips outlined in this guide.

Step 1: Turn off the power to your range. Unplug the cord from the outlet, or flip the circuit breaker in your home’s fuse box to shut off the power.

Step 2: Lift up the edges of the heating element and remove the screws securing the heating element to the also. Then carefully pull out the heating element.

Step 3: Locate the screw securing the drip bowl. The screw is usually located underneath the heating element.

Step 4: Using your Philips screwdriver, unscrew the drip bowl from its secure position.

Step 5: Take the new 8-inch Frigidaire Range Porcelain Drip Bowl (A316222301) and set it in its place.

Step 6: Secure the drip bowl with the screw you removed in Step 4.

Step 7: Replace the heating element and tighten the screws.

Step 8: Plug the cord back into the outlet or turn the circuit breaker back on in the fuse box.

And that’s it – you just replaced the porcelain drip bowl!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.