GE BASKET ASSEMBLY 24″ – WH45X10107

This is a genuine OEM part that works for some models of GE, and Hotpoint models. Replacing the 3045EL1002P LG Dryer Drum Tub Assembly

Instructions

1. Unplug the dryer from the power outlet and remove the lint screen.

2. Take off the lint filter housing by unscrewing the two screws on the bottom of the dryer.

3. Slide the top panel of the dryer up and off.

4. Unscrew the drum’s four screws on the outer ring.

5. Disconnect the wiring harness connecting the drum to the motor.

6. Pull the drum out of the dryer housing.

7. Remove the old drum tub assembly by using a screwdriver to remove the screws on the side of the assembly.

8. Slide the new 3045EL1002P LG Dryer Drum Tub Assembly into the dryer housing.

9. Reconnect the wiring harness back to the motor.

10. Screw the outer ring of the drum back into the housing.

11. Slide the top panel of the dryer back onto the housing.

12. Replace the lint filter housing and securely screw it in place.

13. Replace the lint screen and plug the dryer back into the power outlet.

14. Test the dryer by running it on a high-heat cycle.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search GTUP240EM1WW GTUP240EM2WW GTUP240EM4WW GTUP240GM1WW GTUP240GM2WW GTUP240GM3WW GTUP240EM5WW GTUP240EM6WW GTUP240EM3WW GTUP240GM0WW GTUP240GM4WW GTUP240GM5WW GTUP240GM6WW GTUP240EM0WW