GE CONFIGURED UI BOARD – WD21X31899

This is a genuine OEM part that works for some models of GE, and Hotpoint models. Instructions for Replacing the GE WD21X23463 KIT SVC UI FRONT LOGIC

This guide will help you replace the GE WD21X23463 KIT SVC UI FRONT LOGIC. Before starting, make sure that you are wearing all appropriate safety gear, such as gloves and eye protection.

1. Unplug power to the appliance. Turn off the water supply to the dishwasher and disconnect the drain line.

2. To access the part, remove the upper dish rack and then remove any screws securing the upper console panel.

3. Carefully remove the upper console panel and set aside.

4. Locate the two connectors on the logic board and carefully disconnect them.

5. Unscrew the mounting screws to remove the logic board and set aside.

6. Insert the new logic board in place and screw it into place.

7. Reconnect the two connectors to the new logic board.

8. Replace the upper console panel, screws, and dish rack.

9. Restore power, water supply, and drain line connections.

10. Test the dishwasher to ensure proper operation.

Congratulations, you have successfully completed the replacement of the GE WD21X23463 KIT SVC UI FRONT LOGIC!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.