GE CONTROL TIMER – WE4M527

GE General Electric RCA Hotpoint Sears Kenmore Clothes Dryer CONTROL TIMER WE4M527We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs. Replacing the GE WE4M527 Control Timer:

1. Unplug the dryer before servicing.

2. Remove the back panel of the dryer.

3. Locate the control timer in the lower right corner of the dryer.

4. Disconnect the wiring harnesses from the back of the timer by unlocking the clips and lifting them.

5. Remove the mounting screws that secure the timer to the dryer’s cabinet.

6. Pull out the old timer and disconnect it from the cabinet.

7. Insert the new timer into the cabinet and reconnect the wiring harnesses.

8. Screw the new timer securely in place with the mounting screws.

9. Replace the back panel of the dryer.

10. Plug the dryer back in and turn it on to test.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search GTDP490GD7WS GHDP490EF4WW GTDP490ED8WS GTDP490ED7WS GHDP490EF6WW GTDP490GD0WS GTDP490GD1WS GTDP490GD6WS GHDP490GF5WW GHDP490GF6WW GHDP490GF4WW GHDP490EF5WW GTDP490GD8WS GTDP490ED9WS GTDP490ED3WS GTDP490ED2WS GTDP490ED6WS GHDP490EF0WW GHDP490EF3WW GHDP490GF3WW GTDP490GD2WS GHDP490EF2WW GHDP490GF1WW GHDP490GF2WW GRDN510EM2WS GRDN510GM2WS GTDN500EM2WS GTDN500GM2WS GTDP400EM2WS GTDP400GM2WS GHDP490EF1WW GTDP490GD3WS PTDN600EM2WT PTDN600GM2WT GTDP490ED0WS GTDP490ED1WS GTDP490GD4WS GTDP490ED5WS GHDP490GF0WW GTDP490GD5WS