GE DISHWASHER DOOR GASKET – WD08X10057

Door gasket works with some GE, and Hotpoint models of dishwashers. Step 1: Unplug the Dishwasher – Before beginning the process of replacing your WD08X10057 GE Door Gasket, make sure to unplug the dishwasher from your wall outlet.

Step 2: Remove Door Panel – To gain access to the WD08X10057 door panel, remove the two screws on the top of the panel near the hinges. Once the screws are detached, lift the top portion of the panel up and off the dishwasher.

Step 3: Remove Gasket – Pull out the old gasket away from the edge of the door and discard. Make sure you do not pull too hard, as this could cause damage to the door.

Step 4: Install New Gasket – Place the new WD08X10057 gasket along the edge of the door. Make sure it is properly aligned and flat against the door.

Step 5: Reattach Panel – Replace the door panel by aligning the top lip with the dishwasher’s top and pushing it down until it clicks. Secure the panel with the two screws that were previously removed.

Step 6: Test and Check – Plug the dishwasher back into the wall and turn it on. Verify that the water is not leaking out the sides of the door. Your GE Dishwasher Door Gasket has now been successfully replaced!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search ADW1000K00BB ADW1100N00BB ADW1100N00WW ADW1100N10BB ADW1100N10WW ADW1100N15BB ADW1100N15WW ADW1100N20BB ADW1100N20WW ADW1100N30BB ADW1100N30WW ADW1100N35BB ADW1100N35WW EDW3000G03BB EDW3000G03CC EDW3000G03WW EDW3060G02SS EDW3060G03SS GHDA350N00BB GHDA350N00WW GHDA350N10BB GHDA350N10WW GHDA350N20BB GHDA356N00SS GHDA356N10SS GHDA356N20SS GSC3500N00BB GSC3500N00WW GSC3500N10BB GSC3500N10WW GSC3500N15BB GSC3500N15WW GSD1100N00WW GSD1100N10WW GSD1300N00BB GSD1300N00WW GSD1300N10BB GSD1300N10WW GSD1300N15WW GSD1300N20WW 1 2 3 4 5