GE DISHWASHER DRAIN PUMP KIT – WD19X24829

Drain pump kit works with some GE, and Hotpoint models of dishwashers. DIY Guide: How to Replace the WD19X24829 GE Dishwasher Drain Pump Kit

Step 1: Disconnect the power from your dishwasher by unplugging it from the wall outlet.

Step 2: Find the pump assembly inside the dishwasher. It is usually located behind the lower dishrack.

Step 3: Remove the screws that hold the pump motor in place, so you can access the drain hose.

Step 4: Unscrew the hose clamps at both ends of the hose and remove the hose.

Step 5: Place the new pump into position and plug the electrical connections on the back.

Step 6: Reattach the hose clamps and re-route the drain hose.

Step 7: Secure the pump with the mounting screws.

Step 8: Plug in your dishwasher and test it out.

Follow these steps to successfully replace the WD19X24829 GE dishwasher drain pump kit. Be sure to follow all safety precautions when handling any electrical equipment.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.