GE DRUM BEARING SLIDE GLIDE, WHITE – WE1M504

GE General Electric RCA Hotpoint Sears Kenmore Clothes Dryer Drum Bearing Slide Glide – White WE1M504We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs. 1. Begin by turning off the power to the dryer at the circuit breaker to avoid the risk of electric shock.

2. Unplug the dryer from the wall outlet.

3. Open the dryer door and remove the two screws that hold the front panel in place.

4. Carefully lift the front panel off and set it aside.

5. Locate the WE1M504 GE Drum Bearing Slide Glide, which is located at the center of the dryer drum.

6. Remove the screws from the slide glide and remove it from the dryer.

7. Slide the new WE1M504 GE Drum Bearing Slide Glide in place, lining up the holes and mounting screws.

8. Secure the new slide glide with the mounting screws and tighten them to ensure a snug fit.

9. Replace the front panel and secure it with the two screws.

10. Plug the power cord back into the wall outlet, and turn the circuit breaker to the “on” position.

11. Test the dryer to make sure it runs properly.

That’s all there is to it! Replacing the WE1M504 GE Drum Bearing Slide Glide is simple and easy, provided you take all necessary safety precautions.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search 2661532210 2661532211 2671532210 DBB5000EF0GG DBB5000GF0GG DBB5000GF1GG DBLR333EE0CC DBLR333EE0WW DBLR333EE1CC DBLR333EE1WW DBLR333EG2CC DBLR333EG2WW DBLR333EG3CC DBLR333EG3WW DBLR333EG4CC DBLR333EG4WW DBLR333EG5CC DBLR333EG5WW DBLR333EG6CC DBLR333EG6WW DBLR333EG7WW DBLR333GE0CC DBLR333GE0WW DBLR333GE1CC DBLR333GE1WW DBLR333GE2CC DBLR333GE2WW DBLR333GG2CC DBLR333GG2WW DBLR333GG3CC DBLR333GG3WW DBLR333GG4CC DBLR333GG4WW DBLR333GG5CC DBLR333GG5WW DBLR333GG6CC DBLR333GG6WW DBLR333GG7CC DBLR333GG7WW DBLR333GG8WW 1 2 3 4 5