GE DRYER MAIN TIMER KNOB ASSEMBLY – WE01X24552

Main timer knob assembly works with some GE, and Hotpoint models of clothes dryers. Replacing the WE01X24552 GE Dryer Main Timer Knob Assembly

1. Unplug your GE dryer from the power outlet and remove the cabinet top to access the timer assembly.

2. Using a 1/4″ nut driver, loosen the screws on the main timer knob and remove them from the timer shaft it is held onto.

3. Remove the two mounting screws that hold the timer assembly in place and then carefully pull out the timer.

4. Insert the new GE WE01X24552 timer knob into the timer shaft, making sure that all four connector pins line up with their respective slots in the back of the new knob.

5. Secure the new GE WE01X24552 timer knob in place by firmly tightening the two screws on the back side of the timer.

6. Carefully mount the new timer back into the dryer by inserting the two screws that were removed earlier.

7. Reattach the dryer’s cabinet top.

8. Plug the dryer back into the wall outlet and turn on the power.

9. Test the new timer by setting it to the desired cycle and make sure that it works properly.

10. You have successfully replaced the GE WE01X24552 Dryer Main Timer Knob!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search GUD27EESN0WW GTX42GASJ2WW GTX42EASJ2WW GTD45GASJ2WS GTD45GASJ1WS GTD45GASJ0WS GTD45EASJ2WS GTD45EASJ1WS GTD45EASJ0WS GTD42GASJ2WW GTD42EASJ2WW GTD33GASK0WW GTD42EASJ0WW GTX42GASJ0WW GTX33GASK0WW GTD33PASK0WW GTX42GASJ1WW GTD42GASJ1WW GTX42EASJ0WW GTX33EASK0WW GTD33EASK0WW GTX42EASJ1WW GTD42EASJ1WW GTD42GASJ0WW