GE DRYER START BUTTON ASSEMBLY – WE04X24719

Start button assembly works with some GE, and Hotpoint models of clothes dryers. DIY Instructions for Replacing the GE Dryer Start Button Assembly (WE04X24719)

1. Unplug the dryer from the wall before attempting to replace the start button assembly.

2. Remove the top panel of the dryer by unscrewing the screws located near the top of the dryer’s back panel and pulling off the panel.

3. Locate the start button assembly on the front panel. It is held in place with two small screws.

4. Unscrew the two screws holding the start button assembly in place.

5. Pull the old start button assembly off the front panel.

6. Place the new start button assembly into the opening where you removed the old one. Make sure it is securely in place.

7. Screw the new start button assembly into place using the two small screws.

8. Replace the top panel of the dryer, making sure all the screws are tight.

9. Plug the dryer back into the wall outlet and test the start button assembly to make sure it works properly.

10. Enjoy your newly replaced start button assembly and your now functioning dryer.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search HTX24GASK0WS HTX24GASK0WW HTX21PASK0WW HTX21GASK0WW HTX21EASK0WW GTX42GASJ2WW GTX42EASJ2WW GTD45GASJ2WS GTD45GASJ1WS GTD45GASJ0WS GTD45EASJ2WS GTD45EASJ1WS GTD45EASJ0WS GTD42GASJ2WW GTD42EASJ2WW GTD33GASK0WW GTD42EASJ0WW HTX24EASK0WS HTX24EASK0WW GTX42GASJ0WW GTX33GASK0WW GTX22GASK0WW GTD33PASK0WW GTX42GASJ1WW GTD42GASJ1WW GTX42EASJ0WW GTX33EASK0WW GTX22EASK0WW GTD33EASK0WW GTX42EASJ1WW GTD42EASJ1WW GTD42GASJ0WW