GE IMPELLER/AUGER BASE – WH43X32857

This is a genuine OEM part that works for some models of GE, and Hotpoint models. 1. Carefully unplug your washing machine from the power outlet.

2. Turn off the water at the spigot and disconnect the supply hoses from the washing machine.

3. Lay a towel on the floor. Remove the screws securing the access panel to the bottom of the machine, and gently disconnect the wiring harnesses. Place the access panel aside.

4. Reach your hand into the machine and grip the impeller with the other hand, turn the impeller clockwise until it comes out.

5. Take the new impeller, and align the flat side with the flat side of the impeller housing. Insert the impeller into the housing and turn it counterclockwise to ensure proper placement.

6. Reattach the wiring harness and replace the access panel. Secure the access panel with the screws.

7. Connect the supply hoses to the washing machine and turn the water back on at the spigot.

8. Plug the machine back in and enjoy your freshly replaced impeller!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.