GE MAIN CONTROL BOARD W/INSTRUC – WE22X34277

This is a genuine OEM part that works for some models of GE, and Hotpoint models. Step #1: Unplug the Washer

Before beginning any maintenance or repair work, be sure to unplug the washer from the wall outlet to avoid any potential electrical shock.

Step #2: Remove the Top Panel

Using a Phillips head screwdriver, remove the screws located at the back of the top panel and set aside. Carefully lift the panel off the unit and set aside.

Step #3: Locate the Main Control Board

Once the top panel is removed you should be able to see the main control board located at the back of the unit.

Step #4: Unscrew the Main Control Board

Unscrew the main control board by removing the screws located on either side of it. Once the screws are removed, the main control board will be free to be removed.

Step #5: Install the New Main Control Board

Take the new main control board and carefully fit it into place. Make sure that it is securely in place and that all connections are properly aligned.

Step #6: Secure the Control Board

Secure the main control board with the screws that were previously removed.

Step #7: Replace the Top Panel

Place the top panel back onto the unit and replace the screws.

Step #8: Plug the Washer Back In

Plug the washer back into the wall outlet and turn it on to test the new main control board.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search GFD85ESPN0RS GFD85ESSN0WW GFD85ESPN0DG GFD85GSSN0WW GFD85GSPN0RS GFD65GSSN0WW GFD55GSSN0WW GFD55ESSN0WW GFD65ESPN0SN GFD65ESSN0WW GFD65GSPN0SN GFD85GSPN0DG GFV55ESSN0WW