GE SPARK MODULE – WB13T10046

GE General Electric Hotpoint Sears Kenmore Range Stove Oven Cooktop SPARK MODULE (4+0) WB13T10046We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs. DIY Instructions for Replacing the GE WB13T10046 Spark Module

Step 1: To start, you’ll need to turn off the power to your stovetop or range. Do this by flipping the circuit breaker switch for the stovetop/range or unplugging the unit from the wall.

Step 2: Next, you’ll need to remove the top and back panels of the stovetop or range. This can usually be done by removing a few screws and sliding the panels away from the unit.

Step 3: Once the panels are removed, you’ll need to locate the spark module. This is typically located behind the control panel. The spark module will have two wires connected to it.

Step 4: Carefully unscrew the screws that hold the spark module in place and remove it from the unit.

Step 5: Now, take the new spark module (GE WB13T10046) and connect the two wires to the corresponding terminals on the module.

Step 6: After the spark module is securely in place, reattach the back and top panels and turn the power back on.

Step 7: Now, the spark module should be replaced and the stovetop or range should be functioning properly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search J2C968BEK1BB J2C968BEK3BB J2C968CEK1CC J2C968CEK3CC J2C968SEK1SS J2C968SEK2SS J2C968SEK3SS J2C968WEK1WW J2C968WEK3WW J2S968BEK1BB J2S968BEK2BB J2S968BEK3BB J2S968BH4BB J2S968BH5BB J2S968BH6BB J2S968KEK1CC J2S968KEK2CC J2S968KEK3CC J2S968KH4CC J2S968KH5CC J2S968KH6CC J2S968SEK1SS J2S968SEK2SS J2S968SEK3SS J2S968SH4SS J2S968SH5SS J2S968SH6SS J2S968TEK1WW J2S968TEK2WW J2S968TEK3WW J2S968TH4WW J2S968TH5WW J2S968TH6WW JGP328BEJ1BB JGP328BEK1BB JGP328BEK2BB JGP328CEJ1CC JGP328CEK1CC JGP328CEK2CC JGP328SEJ1SS 1 2 3 4 5