LG DRYER DRUM TUB ASSEMBLY – 3045EL1002P

Drum tub assembly for some models of LG clothes dryers. Replacing the 3045EL1002P LG Dryer Drum Tub Assembly

Instructions

1. Unplug the dryer from the power outlet and remove the lint screen.

2. Take off the lint filter housing by unscrewing the two screws on the bottom of the dryer.

3. Slide the top panel of the dryer up and off.

4. Unscrew the drum’s four screws on the outer ring.

5. Disconnect the wiring harness connecting the drum to the motor.

6. Pull the drum out of the dryer housing.

7. Remove the old drum tub assembly by using a screwdriver to remove the screws on the side of the assembly.

8. Slide the new 3045EL1002P LG Dryer Drum Tub Assembly into the dryer housing.

9. Reconnect the wiring harness back to the motor.

10. Screw the outer ring of the drum back into the housing.

11. Slide the top panel of the dryer back onto the housing.

12. Replace the lint filter housing and securely screw it in place.

13. Replace the lint screen and plug the dryer back into the power outlet.

14. Test the dryer by running it on a high-heat cycle.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search 61422 61423 61433 61462 61463 71423 71433 71462 71463 81182 81282 81283 81382 81383 DLE7200VE DLE7200WE DLE7300VE DLE7300WE DLEX3370R DLEX3370V DLEX3370W DLEX3570V DLEX3570W DLEX3700V DLEX3700W DLEX3900B DLEX3900K DLEX3900W DLEX4200B DLE1001F DLE1001W DLE1101W DLE1501W DLE3050W DLE3170W DLE3180W DLE3400W DLE3460V DLE3460W DLE3500W 1 2 3