LG WASHER INNER DRUM TUB SPIN BEARING SEAL – 4036ER2004A

LG Electronics Sears Kenmore Clothes Washer Washing Machine Inner Drum Tub Spin Bearing Seal 4036ER2004A Replacing the 4036ER2004A LG Washer Inner Drum Tub Spin Bearing Seal

Instructions:

1. Unplug your LG washer from the power source and turn off the water supply.

2. Lay down a large blanket or a few towels underneath the washer to absorb any water that may come out during the repair process.

3. Look for the four screws at the top rear of the washing machine and remove them using a Phillips screwdriver.

4. Pull the top panel of the washer away from the back wall to expose the inner drum.

5. Remove the four screws from the side of the drum with a Phillips screwdriver.

6. Lift the inner drum gently out of the washer and place it on the blanket or towels you laid down earlier.

7. Gently remove the old spin bearing seal from the tub.

8. Take your new spin bearing seal and carefully place it around the edge of the drum.

9. Reinstall the inner drum into the washer and secure it with the four screws.

10. Replace the top panel of the washer and reinstall the four screws at the top rear of the washer.

11. Plug the washing machine in and turn on the water supply.

12. Test the washer to ensure the seal was successfully replaced.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search WM1385HW WM1388HW WM1455HVA WM1455HWA WM3477HS WM3488HS WM3488HW WM3555HWA 41373 GCWW1069CS7 GCWF1069CD1 GCWF1069QD1 GCWM1069CD7 GCWM1069CS7 GCWM1069QD7 GCWM1069QS7 GCWW1069CD7