LG WASHER REAR TUB GASKET REAR TUB SEAL GASKET – MDS62058301

LG Electronics Sears Kenmore Clothes Washer Washing Machine Rear Tub Gasket Rear Tub Seal Gasket MDS62058301 DIY Instructions for Replacing the MDS62058301 LG Washer Rear Tub Gasket/Rear Tub Seal Gasket

1. Turn off the washer’s power supply and unplug it from the wall.

2. Carefully lift the top panel of the washing machine to gain access to the rear tub gasket.

3. Use a flathead screwdriver to remove all the screws that are holding the gasket in place.

4. Pull the old gasket off and discard it.

5. Inspect the area around the old gasket for any damage or wear. If any is found, replace any necessary parts before continuing.

6. Place the new gasket over the rear tub of the washing machine and ensure it is aligned properly.

7. Secure the gasket with the screws you removed earlier, making sure to tighten them securely.

8. Replace the top panel of the machine.

9. Plug the washer back into its power source and turn it on.

10. Run a cycle and inspect the area around the gasket after it is complete, ensuring there is no water leakage and all connections are secure.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search 41002 41003 41072 41073 41302 41303 41383 41582 41583 41682 41683 TCW2013CS3 TCWM2013CD3 TCWM2013CS3 TCWM2013QD3 TCWM2013QS3 WM3370HVA WM3370HWA WM3400CW WM3500CW WM3570HVA WM3670HVA WM3670HWA WM3700HRA WM3700HVA WM3770HVA WM3770HWA WM3997HWA WM4270HVA WM4270HWA WM4370HKA WM4370HVA WM5000HVA WM5000HWA WM5005HKA WM8100HVA WM8100HWA WM9000HVA WM9000HWA WM9500HKA