LG WASHER ROTOR ASSEMBLY – 4413ER1002F

LG Electronics Sears Kenmore Clothes Washer Washing Machine ROTOR ASSEMBLY 4413ER1002F 1. Turn off the power to the LG washer and unplug it from the wall outlet before beginning any work.

2. Locate the four screws along the top of the washing machine that secure the wash tub and the cabinet together. Remove these screws.

3. Carefully pull the top of the washing machine off the cabinet and tilt it back. You will now see the rotor assembly.

4. Use a Phillips head screwdriver to unscrew the bolts that hold the rotor assembly in place.

5. Pull out the old rotor assembly and insert the new one in its place.

6. Secure the rotor assembly in place with the bolts that you removed earlier and use the Phillips head screwdriver to tighten the bolts.

7. Replace the top of the washing machine and secure it to the cabinet using the four screws that you removed in step two.

8. Plug the LG washer back in and turn the power back on.

9. Run an empty load of clothes to make sure the new rotor assembly is installed correctly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.