SAMSUNG SERVICE KIT DOOR DOOR LATC – DE81-04605A

Door latch works with some Dacor models of stoves / ovens / ranges. Step-by-Step DIY Instructions on How to Replace a Samsung DE81-04605A SVC-SERVICE KIT Door Latch

1. Before you begin, make sure to turn off your appliance’s power and disconnect it from the power supply.

2. Open the door of the appliance and remove the two screws that secure the door latch to the door. Use a Phillips head screwdriver to do this.

3. Pull the latch away from the door, and then use a flat head screwdriver to remove the plastic cover over the latch.

4. Disconnect all of the wires or cables that are connected to the latch, taking special care not to damage them while doing so.

5. Remove the old latch from the door.

6. Insert the new Samsung DE81-04605A SVC-SERVICE KIT door latch into the door and make sure it is properly aligned and evenly seated.

7. Connect all of the wires or cables that were previously attached to the old latch onto the new one.

8. Secure the latch in place using the two screws that you removed earlier, and then replace the plastic cover over the latch.

9. Once you have finished, turn the power back on and test the new latch to make sure that it works properly.

10. Congratulations, you have successfully replaced the Samsung DE81-04605A SVC-SERVICE KIT Door Latch!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.