SAMSUNG SPILL TRAY BLACK PORCLN – DE81-04616A

Porcelain spill tray works with some Dacor models of stoves / ovens / ranges. DIY Instructions on Replacing the Samsung DE81-04616A SVC-SPILL TRAY BLK PORC

Are you looking to replace the Samsung DE81-04616A SVC-SPILL TRAY BLK PORC in your own? If so, this DIY guide will help walk you through the steps to get the job done.

Tools You Will Need:
• Safety goggles
• Phillips head screwdriver
• Pliers

Step 1: Unplug Your Appliance
The first and most important step you should take before doing any work on an electrical appliance is to unplug it from the wall. This will help prevent you from getting electrocuted while working.

Step 2: Remove the Old Tray
Once the appliance is unplugged, locate the old tray and carefully remove it using a Phillips head screwdriver. Make sure to unscrew all the screws that are holding the tray in place.

Step 3: Install the New Tray
Now that the old tray has been removed, it’s time to install the new one. Make sure the new tray is firmly in place and secure it using the same Phillips head screwdriver you used to remove the old tray. Make sure all screws are tight and secure before proceeding further.

Step 4: Reassemble the Appliance
Once the new tray is installed, it’s time to reassemble the appliance. Put the cover back on and make sure to line up all the screws so they are nice and snug. You may need a pair of pliers to tighten any loose screws.

Step 5: Test the Appliance
Finally, plug your appliance back into the wall and test it out to make sure everything is functioning properly. If all goes well, you have successfully replaced the Samsung DE81-04616A SVC-SPILL TRAY BLK PORC.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.