SAMSUNG WAVE GUIDE COVER – DE81-07930A

Waveguide cover works with some Dacor models of microwaves. Replacing the Samsung DE81-07930A SVC-WAVE GUIDE COVER

1. Unplug your microwave from the power source and remove the screws on the inside of the machine that hold the screws in place.

2. Remove the screws from the side panel to open the top of the microwave, and then set aside the side panel.

3. Locate the SVC-WAVE GUIDE COVER, which is located at the back of the microwave cavity.

4. Use a Phillips head screwdriver to unscrew and remove the old SVC-WAVE GUIDE COVER.

5. Take the new SVC-WAVE GUIDE COVER and align the screws on the cover with the corresponding threaded holes in the back of the microwave cavity.

6. Secure the new cover into place with the Phillips head screwdriver.

7. Place the side panel back onto the top of the microwave and secure it with the screws that were removed.

8. Plug the microwave back into the power source and turn it on.

9. Test the microwave to ensure it is working properly.

By following these steps, you should now have successfully replaced the Samsung DE81-07930A SVC-WAVE GUIDE COVER in your microwave.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.