SPEED QUEEN CYLINDER GLIDE – D513710

Cylinder glide works with some Speed Queen, and Amana models of clothes dryers. How to Replace the D513710 Speed Queen Dryer Cylinder Glide

1. Unplug your dryer and move it to an area with plenty of room to work in.

2.Lay the dryer on its back.

3.Remove the screws that are holding the lint trap in place.

4.Remove the lint trap and set aside.

5.Locate the cylinder glide, which is held in place by two screws.

6.Remove the screws and take out the old cylinder glide.

7.Apply a small amount of lubricant to the edges of the replacement cylinder glide.

8. Insert the cylinder glide into place and replace the screws that were used to hold it there.

9.Replace the lint trap and secure it with the screws.

10.Flip your dryer back upright and plug it in.

11.Test the dryer toggle switch to make sure the cylinder glide is working properly.

12.Enjoy your newly functioning dryer!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product 503452 510187 510161P 510188 513710 D510161P Search ADE30RGS171TW01 ADE32FSS431AN01 ADE32FSS431NN22 ADE32FSS541RN01 ADE3LRGS171TW01 ADE3SRGS173CW01 ADE3SRGS173TW01 ADE3SRGS175CW01 ADE3SRGS175CW14 ADE3SRGS175TW01 ADE3TFWS431AW01 ADE3TRGS451LW22 ADE3TRWS431AW01 ADE3TRWS431NW22 ADE3TRWS431NW29 ADE3TRWS461AW01 ADE41FSS171TN01 ADE41FSS171TN03 ADE4BFGS171TW01 ADE4BRGS171TW01 ADE4BRGS171TWAH ADE4BRGS175CW01 ADE4BRGS175CW14 ADE4BRGS175TW01 ADEE8RGS173CW01 ADEE8RGS173TW01 ADEE9BGS173CW01 ADEE9BGS173TW01 ADEE9BGS175CW01 ADEE9BGS175CW14 ADEE9BGS175TW01 ADEE9BSS173CN01 ADEE9BSS173TN01 ADEE9BSS175CN01 ADEE9BSS175CN14 ADEE9BSS175TN01 ADEE9RGS173CW01 ADEE9RGS173TW01 ADEE9RGS175CW01 ADEE9RGS175CW14 1 2 3 4 5