Drum support roller kit works with some Speed Queen, and Amana models of clothes dryers. Step 1: Unplug the Speed Queen Dryer from its power source and move it to an area that allows you to easily access the back panel.
Step 2: Use a Phillips-head screwdriver to remove the screws securing the back panel to the dryer’s frame. Once the screws are removed, pull the panel off of the dryer.
Step 3: Locate the old drum support roller kit, which is usually located at the bottom of the dryer’s drum.
Step 4: Disconnect the power connections for the motor and the drum support roller.
Step 5: Using a socket wrench, remove the bolts securing the support roller to the frame of the dryer.
Step 6: Remove the old drum support roller kit and install the new one. Make sure the kit is installed properly, with the axle in the middle of the roller.
Step 7: Secure the new drum support roller kit in place by tightening the bolts with a socket wrench.
Step 8: Replace the power connections to the motor and the drum support roller.
Step 9: Replace the back panel on the dryer and secure it with the screws you removed earlier.
Step 10: Plug the Speed Queen Dryer back into its power source and test it out.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search ADE30RGS171TW01 ADE32FSS431AN01 ADE32FSS431NN22 ADE32FSS541RN01 ADE3LRGS171TW01 ADE3SRGS173CW01 ADE3SRGS173TW01 ADE3SRGS175CW01 ADE3SRGS175CW14 ADE3SRGS175TW01 ADE3TFWS431AW01 ADE3TRGS451LW22 ADE3TRWS431AW01 ADE3TRWS431NW22 ADE3TRWS431NW29 ADE3TRWS461AW01 ADE41FSS171TN01 ADE41FSS171TN03 ADE4BFGS171TW01 ADE4BRGS171TW01 ADE4BRGS171TWAH ADE4BRGS175CW01 ADE4BRGS175CW14 ADE4BRGS175TW01 ADEE8RGS173CW01 ADEE8RGS173TW01 ADEE9BGS173CW01 ADEE9BGS173TW01 ADEE9BGS175CW01 ADEE9BGS175CW14 ADEE9BGS175TW01 ADEE9BSS173CN01 ADEE9BSS173TN01 ADEE9BSS175CN01 ADEE9BSS175CN14 ADEE9BSS175TN01 ADEE9RGS173CW01 ADEE9RGS173TW01 ADEE9RGS175CW01 ADEE9RGS175CW14 1 2 3 4 5


Reviews
There are no reviews yet.