Idler pulley for some models of Speed Queen / Alliance washing machines. DIY Instructions: Replacing the 38225P Speed Queen Washer Idler Pulley (Wheel)
1. Unplug your washing machine from the power source.
2. Disconnect the water supply hoses from the back of the washer.
3. Remove the back panel from your washer. This can be done by unscrewing the screws that hold it in place.
4. Locate the idler pulley wheel – it is located on the bottom of the washer.
5. Unscrew the nut that holds the wheel in place and remove it.
6. Install the new wheel, making sure to firmly screw the nut in place.
7. Reassemble the back panel of the washer and screw it back in place.
8. Reconnect the water supply hoses to the back of the washer.
9. Plug in your washing machine and test it out to make sure the wheel is functioning properly.
10. Enjoy your newly replaced 38225P Speed Queen Washer Idler Pulley (Wheel)!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product 38225 Search AWN311SP111TW01 AWN312SP303LW22 AWN402PP111TW01 AWN412SP111TW01 AWN432SP111TW01 AWN432SP113CW04 AWN432SP113FW28 AWN432SP113TW01 AWN432SP113TW04 AWN542SP111TW01 AWN542SP111TWAH AWN552SN301AW01 AWN552SN301NW22 AWN552SN301NW29 AWNA11SP111TW01 AWNA62SN301AW01 AWNA62SN303AW01 AWNE82SN303AW01 AWNE82SP113CW01 AWNE82SP113FW01 AWNE82SP113TW01 AWNE92SN303AW01 AWNE92SP113FW01 AWNE92SP113TW01 AWNE92SP123DW01 AWNE92SP303NW29 AWNE92SP303NW36 AWNE92SP303XW01 AWNE92SP303XW26 AWNE92SP303XW34 AWNE92SP543DW01 AWS01NW AWS17NW AWS44NW AWS45NW AWS48NW AWS51NW AWS52NW AWS53NW AWS75NW 1 2 3 4 5


Reviews
There are no reviews yet.