SPEED QUEEN SHOCK ASSEMBLY KIT – 803777P

This Speed, Queen 803777P KIT SHOCK ASSY kit is the perfect way to upgrade your washing machine. Designed to fit most standard washing machines, this kit will reduce the amount of vibration you experience during a wash cycle. The kit contains two shocks – one for the washer and one for the dryer – and mounting hardware. Plus, the corrosion-resistant construction ensures that your machines will operate efficiently for years. Upgrade your laundry experience with this all-in-one shock kit from Speed Queen. We’re your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Step 1: Gather Your Tools

Before you start replacing the Speed Queen 803777P KIT SHOCK ASSY, you’ll need to gather the necessary tools. You will need a Phillips screwdriver, needle nose pliers, and a 1/4 inch flat head screwdriver.

Step 2: Access the Shock Assembly

Open the top of the washer and locate the shock assembly. The shock assembly is situated near the back of the washer and is attached to the frame with three Phillips screws. Use the Phillips screwdriver to remove all three screws and set them aside in a safe place.

Step 3: Remove the Shock Assembly

Once the screws are removed, gently pull the shock assembly away from the frame. The shock assembly should come out easily.

Step 4: Disconnect the Electrical Connection

Using the needle nose pliers, carefully remove the electrical connection from the shock assembly by gently pulling it off.

Step 5: Install the New Shock Assembly

Once the old shock assembly is removed, take the new assembly and place it onto the frame. Secure the assembly in place with the three Phillips screws that were removed earlier.

Step 6: Reconnect the Electrical Connection

Use the needle nose pliers to reconnect the electrical connection to the new shock assembly. Once connected, make sure the connection is secure by gently tugging on the wire to make sure it is not loose.

Step 7: Test the Shock Assembly

Once the Shock Assembly is secured in place and the electrical connection is reconnected, close the lid of the washer and turn on the power. Run a short cycle on the washer and make sure the shock assembly is working properly. If everything seems to be working correctly, then you have successfully replaced your Speed Queen 803777P KIT SHOCK ASSY.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product 803777 Search AFBE9BSP303NN29 AFBE9BSP303NW29 AFBE9BSP305AN01 AFBE9BSP305AW01 AFBE9BSP305NW29 AFN50RSP113FW01 AFN50RSP113TW01 AFN50RSP115TW01 AFN50RSP115TW13 AFNE9BSG303NW36 AFNE9BSG305NW36 AFNE9BSP113CN01 AFNE9BSP113CW01 AFNE9BSP113FN01 AFNE9BSP113TN01 AFNE9BSP113TW01 AFNE9BSP115CN01 AFNE9BSP115CW01 AFNE9BSP115TN13 AFNE9BSP115TW01 AFNE9BSP115TW13 AFNE9BSP123DN04 AFNE9BSP123DW04 AFNE9BSP303AN01 AFNE9BSP303AW01 AFNE9BSP303HN01 AFNE9BSP303LN01 AFNE9BSP303NN22 AFNE9BSP303XN01 AFNE9BSP303XN26 AFNE9BSP303XN34 AFNE9BSP303XW01 AFNE9BSP303XW26 AFNE9BSP303XW34 AFNE9BSP305AW01 AFNE9BSP305XW01 AFNE9BSP305XW34 AFNE9BSP543DN04 AFNE9BSP543DW04 AFNE9BSP543ZN01 1 2 3 4 5