SPEED QUEEN WASHER PUMP KIT / BELT – RB150003

Kit belt and pump for some Alliance / Speed Queen models of washing machines. Replacing the Speed Queen RB150003 Alliance Washer Pump Kit / Belt

Tools Needed: Philips screwdriver, flat head screwdriver, 8mm socket and ratchet, Vice grip pliers

Instructions:

1. Unplug the washer from the electrical socket.

2. Turn off the water supply to the washer and disconnect the hoses from the back of the machine.

3. Remove the back panel from the washer.

4. Use a Philips screwdriver to unscrew the four screws holding the pump in place.

5. Carefully remove the pump from the washer.

6. Use a 8mm socket and ratchet to remove the bolts that hold the belt in place.

7. Carefully remove the old belt from the machine.

8. Make sure to clean any built-up lint or dirt from the pulleys.

9. Install the new belt by positioning it around the pulleys and using the vice grip pliers to pull it into place.

10. Replace the bolts that hold the belt in place and tighten them until they are secure.

11. Place the new pump onto the washer and use the Philips screwdriver to secure it in place.

12. Reconnect the hoses and turn the water supply back on.

13. Plug the washer back into the electrical socket and test the machine to make sure it runs correctly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. Search AWN311SP111TW01 AWN402PP111TW01 AWN412SP111TW01 AWN432SP111TW01 AWN432SP113CW04 AWN432SP113FW28 AWN432SP113TW01 AWN432SP113TW04 AWN542SP111TW01 AWN542SP111TWAH AWNA11SP111TW01 AWNE82SP113CW01 AWNE82SP113FW01 AWNE82SP113TW01 AWNE92SP113FW01 AWNE92SP113TW01 AWNE92SP123DW01 AWNE92SP543DW01 AWS01NW AWS17NW AWS44NW AWS45NW AWS48NW AWS51NW AWS52NW AWS53NW AWS75NW AWS76NW AWZ17N*-1102 AWZ44N*-1102 AWZ45N*-1102 AWZ51N*-1102 AWZ52N*-1102 AWZ53N*-1102 CWN311SP111CW01 CWN412SP111CW01 DWN412SP111CW01 DWN432SP113CW01 DWN432SP113CW04 LWB19A*-1109 1 2 3 4 5