WHIRLPOOL 2 BURNER ELECTRIC CARTRIDGE – JEA7000ADBA

Whirlpool Maytag Jenn-Air Range Cook Top Electric 2 Burner Cartridge, Black● Jenn-Air 3 flat blade Cartridge in Black● 1 round centering pin● Offers Large 2,100W Element And Small 1,250W Element● For Use With Designer Line Modular Electric We are a Factory Authorized Parts Distributor for Whirlpool Maytag Jenn-Air. Trust us for all of your Whirlpool Maytag Jenn-Air appliance parts and accessories needs. DIY Instructions for Replacing the JEA7000ADBA Whirlpool 2 Burner Electric Cartridge

If you’re looking to replace your JEA7000ADBA Whirlpool two-burner electric cartridge, this DIY guide will walk you through all the steps. While a professional should be consulted if you have any doubts, by following these instructions, you can save money while ensuring that your new cartridge is correctly and safely installed. Let’s get started!

1. Unplug the power cord from the outlet.

2. Gently lift the burner unit to access the old cartridge.

3. Remove the screws from the old cartridge and set aside.

4. Carefully lift out the old cartridge, being careful not to touch any of the metal components.

5. Slide the new cartridge into place, making sure to line up the screw holes with the existing ones.

6. Secure the new cartridge in place with the screws set aside earlier.

7. Reconnect the power cord to the outlet.

8. Test the new cartridge by turning it on and off to make sure it is working correctly.

Congratulations! You’ve successfully replaced your JEA7000ADBA Whirlpool two-burner electric cartridge. For more detailed information on replacing this cartridge, consult the manufacturer’s instructions or contact a professional.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product A100B A100W JEA7000ADW JEA7000ADB JEA7000ADWA JEA7000ADW No more associated models for this part.