WHIRLPOOL CHOPPER DISHWASHER – W10083957V

Whirlpool KitchenAid Maytag Sears Kenmore Roper Dishwasher CHOPPER W10083957V- 4 Blade We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs. How to Replace the Whirlpool Dishwasher Chopper (W10083957V)

Tools You’ll Need:
-Needle nose pliers
-Rag
-Phillips head screwdriver
-Replacement chopper

Instructions:
1. Unplug the dishwasher from its electrical socket.
2. Use the Phillips head screwdriver to loosen and remove the two screws securing the tub access panel to the side of the dishwasher. Carefully remove the access panel and set it aside.
3. Locate the chopper on the lower left corner toward the front of the dishwasher. Make sure that the water line is not attached or interfere with the removal process.
4. Using a rag, wipe off any debris or grime that may be on the chopper.
5. Once cleaned, use needle nose pliers to remove the three screws that secure the chopper to the dishwasher base.
6. Carefully remove the chopper and discard it.
7. Place the new chopper into position and secure it using the three screws.
8. Reattach the access panel with the two screws.
9. Plug the dishwasher back into its electrical socket.
10. Your Whirlpool dishwasher chopper has now been replaced! Enjoy your newly working dishwasher.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product 8268383 W10083957 WP8268383 No more associated models for this part.