WHIRLPOOL DRYER LINT FILTER SCREEN – 339392V

Lint filter screen works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of clothes dryers. Replacing the 339392V Whirlpool Dryer Lint Filter Screen

1. Before you begin, make sure the power cord is unplugged from the wall outlet.

2. Open the lint filter door and carefully remove the lint filter from the dryer.

3. Remove the two screws at the top of the lint filter housing with a Phillips-head screwdriver.

4. Carefully pull the lint filter housing out of the dryer.

5. Use a flat-head screwdriver to remove the old lint filter screen.

6. Install the new 339392V Whirlpool dryer lint filter screen.

7. Make sure it is securely in place by pressing down on the edges of the new lint filter screen.

8. Put the lint filter housing back into the dryer and reinsert the two screws at the top.

9. Place the new lint filter screen into the lint filter door.

10. Make sure the lint filter door is securely closed.

11. Replace the power cord back into the wall outlet and turn the power back on.

Your 339392V Whirlpool dryer lint filter screen has now been replaced.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product 339392 337133 337448 337451 338405 339391 341030 341429 346671 690634 339392X 339392VP No more associated models for this part.