WHIRLPOOL DRYER POWER CORD – PT220L

Power cord works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of clothes dryers. Instructions for Replacing a Whirlpool PT220L Dryer Power Cord

1. Unplug the existing power cord from the wall outlet and the dryer.

2. Remove the access panel or screws that attach the front panel to the dryer.

3. Locate the strain relief that holds the existing power cord in place. This is a metal band around the socket where the cord enters the dryer.

4. Loosen the metal band using a screwdriver or a pair of pliers and remove the cord from the dryer.

5. Take the new replacement cord and run it through the strain relief.

6. Make sure that the strain relief is securely tightened with a screwdriver or pliers.

7. Connect one end of the cord to the terminal block inside the dryer and the other end to the wall outlet.

8. Replace the access panel or screws attaching the front panel to the dryer.

9. Plug the dryer into the wall outlet.

10. Test the dryer by setting it to a drying cycle and ensuring that it runs properly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product 661592 4392905 Search 1CWED4800DQ0 1CWED5100VQ1 1CWED5200VQ1 3DWED4800YQ0 3DWED4800YQ1 3DWED4800YQ2 3LWED4730FW0 3LWED5500YW0 3LWED5500YW1 3LWED5500YW2 3RLEQ8600WW0 3SWED4800YQ0 4GWED5500YW0 4GWED5500YW1 4GWED5500YW2 4KWED4605FW0 4KWED4705FW0 7EWED1510YM0 7EWED5550YW0 7EWED5550YW1 7EWGD1510YM0 7MWED1600BM0 7MWED1600BM1 7MWED1800EM0 7MWED1900EW0 7MWED5600BW0 7MWED81HEDW0 7MWED90HEFW0 7MWGD8000EW0 7MWGD8000EW1 7MWGD8000EW2 7MWGD8500EC0 7MWGD8500EC1 7MWGD8500EC2 CED123SEW0 CED126SBW0 CED126SBW1 CED126SDW0 CED126SDW1 CED126SXQ0 1 2 3 4 5