Propane gas conversion kit works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of clothes dryers. 1. Begin by unplugging the dryer from its power source and removing the lint screen.
2. Remove the back panel of the dryer to access the wiring for the heating element, thermostat, and igniter.
3. Locate the gas line connection, preferably near the upper left corner of the dryer.
4. Disconnect the gas line and remove the label attached to the gas valve.
5. Replace the existing gas line with the new flex line and secure it using a hose clamp.
6. Install the 49572A Whirlpool Dryer Propane Gas Conversion Kit according to the manufacturer’s instructions. Pay particular attention to ensuring that all fittings are properly secured and sealed.
7. Connect the flex line to the gas valve and ensure that it is tightly secured.
8. Reattach the label to the gas valve and replace the back panel of the dryer.
9. Plug the dryer back into its power source and test the new propane gas conversion kit on a low heat setting.
10. If everything is working properly, you have successfully replaced the 49572A Whirlpool Dryer Propane Gas Conversion Kit.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product 49572 49752 694572 49752 Search 1CWGD5700VW2 3DWGD4800YQ0 4GWGD4900YQ0 7EWGD1510YM1 7MWGD1501AW0 7MWGD1600BM0 7MWGD1601AW0 7MWGD1705YM1 7MWGD1750EQ0 7MWGD1750EQ1 7MWGD1800DM1 7MWGD1800EM0 7MWGD1800EM1 7MWGD1850EI0 7MWGD1850EI1 7MWGD1900EW0 7MWGD1900EW1 7MWGD1930DM2 7MWGD1950EI0 7MWGD1950EI1 7MWGD2150EN0 7MWGD2150EN1 7MWGD7000EW0 7MWGD7000EW1 7MWGD9014YQ1 7MWGD9015YW1 7MWGD9919EM0 7MWGD9919EM1 CGD126SDW2 CGD126SDW3 CGD126SXQ1 CGD126SXQ2 CGD137SDW2 CGD137SDW3 CGD137SXQ1 EGD4400WQ1 IGD4400VQ2 RGD4440VQ2 RGD4516FW0 RGD4640YQ0 1 2 3


Reviews
There are no reviews yet.