WHIRLPOOL HEATING ELEMENT – LA-1044

Maytag – Admiral – Amana – Norge – Magic Chef – Sears Kenmore Dryer Heater Element Assembly LA-1044● 4750 Watt● 240 Volt● Includes part# 530771 thermostat● Old part# 53-1641We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs. Step-by-Step Guide to Replacing Your LA-1044 Whirlpool Heating Element

1. Prepare for the job: Make sure you have the right tools for the job, including a replacement heating element, screwdriver, and other necessary parts. If you’re unsure of what’s required, check with your local appliance store or manufacturer.

2. Mount the bracket: Unscrew the top access panel of the dryer to expose the heating assembly and find the mounting bracket. Unscrew the bracket and remove it from the dryer.

3. Remove the old heating element: Disconnect the wires attached to the old element, located at the back of the dryer. With a screwdriver, unscrew the element from the back of the dryer.

4. Install the new heating element: Take the new element and connect the wires to each side. Secure the element by reattaching the bracket and screws.

5. Replace the access panel: Replace the access panel to the dryer, and make sure it is securely in place.

6. Test the new heating element: Turn on the dryer and use heat settings to test the new element. If the dryer heats up and works properly, the installation was a success.

7. Clean up: Be sure to clean up any tools and materials used in the process of replacing the heating element.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. No more associated models for this part.