WHIRLPOOL REFRIGERATOR DEFROST DRAIN TUBE HEAT PROBE – 819043

The Whirlpool Refrigerator Defrost Drain Tube Heat Probe helps keep your refrigerator working efficiently. This heat probe has a 5-1/4″ long tube with a 1/4″ diameter and is designed to accurately measure the temperature of the defrost drain tube during the defrost cycle. This is an essential part for maintaining your refrigerator’s ability to work properly and stay cool. With this part, you can avoid problems like freezer frost or water leakage that can occur as a result of improper maintenance. The durable construction is sure to last and provide reliable performance. We’re your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Step 1: Prepare to Replace Refrigerator Defrost Drain Tube Heat Probe

– Unplug the refrigerator from the wall outlet.

– Pull the refrigerator away from the wall to access the back.

– Locate the defrost drain tube heat probe, which is located on the lower left side of the refrigerator.

– Gather the necessary tools for the job, such as a pair of needle-nose pliers and a flathead screwdriver.

Step 2: Remove the Old Defrost Drain Tube Heat Probe

– Grasp the old defrost drain tube heat probe with the needle-nose pliers and gently pull it off the refrigerator.

– Disconnect the electrical wiring that is connected to the heat probe, using the flathead screwdriver.

– Carefully wrap the wiring around the new heat probe, ensuring that it is securely in place.

Step 3: Install the New Defrost Drain Tube Heat Probe

– Place the new heat probe in the same position as the old one.

– Push the new heat probe into place and make sure that it is secure.

– Reconnect the electrical wiring, making sure that it is properly connected and tightly secured.

Step 4: Test the Refrigerator

– Plug the refrigerator back into the wall outlet, and then turn it on.

– Monitor the defrost cycle for any signs of leakage or resistance.

– If the cycle appears to be running correctly, then the new heat probe has been installed correctly.

Step 5: Clean Up

– Put away all the tools that were used during the process.

– Clean up any debris or dirt left behind during the installation process.

– Push the refrigerator back into place.

Congratulations! You have successfully replaced the 819043 Whirlpool Refrigerator Defrost Drain Tube Heat Probe.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available. SearchThe following parts are replaced by this product 978498 W10210798 ER819043 No more associated models for this part.